To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Windscreen Wiper Motor Replacement - Short Body


1877637

Callout

Component Name

Preliminary Procedure

Remove the air inlet grille panels. Refer to Air Inlet Grille Panel Replacement : Short Body .

1

Windscreen Wiper Transmission Frame Assembly Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
8.5 N·m (75 lb in)

2

Windscreen Wiper Transmission Frame Assembly

Procedure

  1. Disconnect the windscreen wiper motor electrical connector.
  2. Roll the transmission frame assembly forward in order to release the transmission frame assembly from the upper plenum supports.
  3. Remove the windscreen wiper motor from the wiper transmission frame assembly. Refer to Windscreen Wiper Motor Replacement : Short Body .
   


© Copyright Chevrolet. All rights reserved