Captiva

Jounce Bumper Replacement

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the coil spring. Refer to Coil Spring Replacement .



3. Remove the jounce bumper.

1. Install the jounce bumper to the body panel.

Caution: Refer to Fastener Caution in the Preface section.

2. Tighten the jounce bumper to the body panel hexagon bolt and tighten to 60 N·m (44 lb ft).
3. Install the coil spring. Refer to Coil Spring Replacement .
4. Lower the vehicle.