To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Power Steering Pump Pulley Replacement


2259588

Callout

Component Name

Preliminary Procedure

Remove the power steering pump. Refer to Power Steering Pump Replacement .

1

Power Steering Pump Pulley

Procedure

  1. Use the J-25034-C Remover in order to remove the power steering pump pulley.
  2. Use the J-25033-C Installer in order to install the power steering pump pulley.
  3. Ensure the axial tolerance of the power steering pump pulley on the shaft is within 0.25 mm (0.010 in).

Special Tools

    • J-25033-C Pulley Installer
    • J-25034-C Pulley Remover

For equivalent regional tools, refer to Special Tools .

   


© Copyright Chevrolet. All rights reserved