Preliminary Procedures

1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
2. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
3. Remove the fuel injection feed pipes. Refer to Fuel Injection Fuel Feed Pipe Replacement .

1

Fuel Injection Fuel Rail Fastener

Caution: Refer to Fastener Caution in the Preface section.

Tighten
25 N·m (18 lb ft)

2

Fuel Injection Fuel Rail

Procedure

1. Disconnect the electrical wiring harness connector from the fuel rail.
2. Upon completion of the repair, perform the fuel system priming procedure. Refer to Fuel System Priming .