Preliminary Procedure

1. Remove the engine shield. Refer to Engine Shield Replacement .
2. Remove the engine splash shield. Refer to Engine Splash Shield Replacement .

1

Transmission Fluid Cooler Pipe Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
22 N·m (16 lb ft)

2

Sealing Washer

Note: Remove and discard the sealing washer.

3

Transmission Fluid Cooler Outlet Hose

Procedure

1. Disconnect the transmission line from the radiator and transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
2. Note the routing of the transmission line to ensure proper installation.
3. Remove the transmission line from the clips securing the line to the transmission and fan shroud.
4. Inspect the transmission fluid level. Refer to Transmission Fluid Level and Condition Check .