Cruze

Exhaust Gas Recirculation Manifold Cooling Return Hose Replacement - 2.0L Diesel LNP

1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
2. Remove the engine control module. Refer to Engine Control Module Replacement .
3. Remove the battery tray. Refer to Battery Tray Replacement .
4. Drain the engine cooling system. Refer to Cooling System Draining and Filling .
5. If equipped, disconnect the automatic transmission hose from the radiator surge tank mount.
6. Remove the radiator surge tank clip . Refer to Radiator Surge Tank Replacement . Hang the radiator surge tank aside.
7. Remove the charge air cooler outlet hose. Refer to Charge Air Cooler Outlet Hose Replacement .



8. Remove the 2 clamps (1).
9. Remove the exhaust gas recirculation manifold cooling return hose (2).

1. Install the exhaust gas recirculation manifold cooling return hose (2).
2. Install the 2 clamps (1).
3. Install the charge air cooler outlet hose. Refer to Charge Air Cooler Outlet Hose Replacement .
4. Clip the radiator surge tank into the mount. Refer to Radiator Surge Tank Replacement .
5. If equipped, connect the automatic transmission hose clip to the radiator surge tank mount.
6. Install the battery tray. Refer to Battery Tray Replacement .
7. Install the engine control module. Refer to Engine Control Module Replacement .
8. Fill the engine cooling system. Refer to Cooling System Draining and Filling .
9. Install the engine sight shield. Refer to Engine Sight Shield Replacement .