Preliminary Procedures

1. Remove either the LH or RH rear bumper fascia inner guide. Refer to Rear Bumper Fascia Inner Guide Replacement .
2. Remove the quarter panel tail lamp upper molding. Refer to Quarter Panel Tail Lamp Upper Molding Replacement .
3. Reposition the sound deadening material in order to access the tail lamp nuts.

1

Tail Lamp Nut (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
4.7 N·m (42 lb in)

2

Tail Lamp Electrical Connector

3

Tail Lamp Assembly

Procedure

Upon removal, grasp the tail lamp and give a quick pull rearward in order to disengage the outer tail lamp locator pin from the tail lamp pocket.

Tip
The tail lamp is serviced as a unit, the tail lamp is (LED) Light Emitting Diode.