Preliminary Procedure

Remove the front lower control arm. Refer to Lower Control Arm Replacement .

1

Front Lower Control Arm Bushing Bolt

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Install the lower control arm in a soft jawed vice.
2. Discard the front lower control arm bushing bolt and replace with new ONLY.
3. Tighten the bolt to specifications when the vehicle is sitting on a level surface.

Tighten

1. First Pass: 55 N·m (41 lb ft)
2. Final Pass: additional 100 degrees

2

Front Lower Control Arm Rear Bushing