Preliminary Procedure

Remove the steering wheel inflatable restraint module. Refer to Steering Wheel Inflatable Restraint Module Replacement .

1

Steering Wheel Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
30 N·m (22 lb ft)

2

Steering Wheel

Procedure

1. Disconnect any electrical connectors as necessary.
2. Loosen the steering wheel bolt until 2 to 3 threads are left engaged.
3. Wiggle the steering wheel until the steering wheel disengages completely.
4. Remove the steering wheel bolt.
5. Ensure that there are match marks on the steering wheel and on the steering column shaft.
6. Remove the steering wheel.
7. Transfer any parts as necessary. Refer to Steering Wheel Spoke Lower Cover Replacement as necessary.