To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Inside Rearview Mirror Mount Plate Cover Replacement


2374075

Callout

Component Name

1

Inside Rearview Mirror Mount Plate Cover Replacement

Procedure

  1. From inside the vehicle, position the inside rearview up and away from the inside rearview mirror mount plate cover.
  2. Grasp the top centre of the mounting plate cover push upward and pull rearward at the same time this will release the cover from the top retainers.
  3. Pushing down until the cover fully releases from the mounting plate lower retainers.

Tip
The lower retainer must be engaged first before the two upper bars are attached.

   


© Copyright Chevrolet. All rights reserved