Preliminary Procedures

1. Disconnect the negative and positive cables from the accessory DC power control module. Refer to Battery Positive and Negative Cable Replacement
2. Remove the floor air outlet duct- right side. Refer to Floor Front Air Outlet Duct Replacement - Right Side .

1

Temperature Valve Actuator Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
1.5 N·m (13 lb in)

2

Temperature Valve Actuator

Tip
Actuator is self-calibrating when connecting the battery.Refer to Actuator Recalibration