To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Feed Pipe Replacement — Chassis

Removal Procedure

  1. Remove the engine compartment fuel feed pipe. Refer to Fuel Feed Pipe Replacement : Chassis  → Engine Compartment .
  2. Remove the drivetrain and front suspension frame. Refer to Drivetrain and Front Suspension Frame Replacement .
  3. Remove the fuel tank. Refer to Fuel Tank Replacement .

  4. 2380417
  5. Remove the fuel feed pipe (1) from the plastic clips (2).

  6. 2399328
  7. Remove the fuel feed pipe (1) from the plastic clips (2).

  8. 2399368
  9. Remove the fuel feed pipe (1) from the plastic clips (2).
  10. Disconnect the fuel pressure sensor electrical connector (3).
  11. Disconnect the fuel feed pipe quick connect (4). Refer to Plastic Collar Quick Connect Fitting Service .

Installation Procedure


    2399368
  1. Connect the fuel feed pipe quick connect (4). Refer to Plastic Collar Quick Connect Fitting Service .
  2. Install the fuel feed pipe (1) to the plastic clips (2).
  3. Connect the fuel pressure sensor electrical connector (3).

  4. 2399328
  5. Install the fuel feed pipe (1) to the plastic clips (2).

  6. 2380417
  7. Install the fuel feed pipe (1) from the plastic clips (2).
  8. Install the fuel tank. Refer to Fuel Tank Replacement .
  9. Install the drivetrain and front suspension frame. Refer to Drivetrain and Front Suspension Frame Replacement .
  10. Install the engine compartment fuel feed pipe. Refer to Fuel Feed Pipe Replacement : Chassis  → Engine Compartment .
   


© Copyright Chevrolet. All rights reserved