To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Drive Motor Battery Coolant Pump Inlet Hose Replacement


2399479

Callout

Component Name

Danger: Do not use a service jack in locations other than those specified to lift this vehicle. Lifting the vehicle with a jack in those other locations could cause the vehicle to slip off the jack and roll; this could cause injury or death.

Preliminary Procedure

  1. Drain the coolant. Refer to Drive Motor Battery Cooling System Draining and Filling
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle

1

Drive Motor Battery Coolant Pump Inlet Hose Clamps (Qty: 2)

Procedure

Reposition the drive motor battery coolant pump inlet hose clamps using BO-38185 Hose Clamp Pliers

Special Tools

BO-38185 Hose Clamp Pliers

For equivalent regional tools, Refer toSpecial Tools

2

Drive Motor Battery Coolant Pump Inlet Hose

Tip
Replace corroded hose clamps and brackets.

   


© Copyright Chevrolet. All rights reserved