To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuse Block Replacement


2404800

Callout

Component Name

Preliminary Procedures

  1. Remove the fuse block cover.
  2. Remove the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  3. Remove the battery positive cable from the fuse block only. Refer to Battery Positive Cable Replacement .
  4. Remove the positive and negative cable (B+ APM module to battery fuse block) from the fuse block only. Refer to Battery Positive and Negative Cable Replacement .

1

Body Harness Terminal Nut (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
17 N·m (13 lb ft)

2

Fuse Block

Procedure

Loosen the battery positive post clamp nut and remove the fuse block.

   


© Copyright Chevrolet. All rights reserved