Preliminary Procedure

1. Drain the coolant. Refer to Drive Motor Battery Cooling System Draining and Filling  and Drive Motor Generator Power Inverter Module Cooling System Draining and Filling
2. Remove the radiator air side baffels. Refer to Radiator Air Side Baffle Replacement - Left Side  and Radiator Air Side Baffle Replacement - Right Side
3. Remove the radiator air seal . Refer to Radiator Air Seal Replacement
4. Remove the radiator grille screen. Refer to Radiator Grille Screen Replacement
5. Remove the generator control module coolant radiator hose. Refer to Generator Control Module Coolant Radiator Hose Replacement
6. Remove the drive motor battery radiator inlet hose. Refer to Drive Motor Battery Radiator Inlet Hose Replacement
7. Remove the drive motor battery radiator outlet hose. Refer to Drive Motor Battery Radiator Outlet Hose Replacement
8. Remove the drive motor power inverter module cooling inlet hose. Refer to Drive Motor Power Inverter Module Cooling Inlet Hose Replacement
9. Disconnect the electrical connector from the coolant temperature sensor.

1

Drive Motor Battery Coolant Radiator Bolts (Qty: 2).

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

2

Drive Motor Battery Coolant Radiator