To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Keyless Entry Control Module Replacement


2395006

Callout

Component Name

Preliminary Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the right side quarter inner trim panel. Refer to Quarter Inner Trim Finish Panel Replacement .

1

Keyless Entry Control Module

Procedure

  1. Disconnect the electrical connectors.
  2. Unsnap the receiver from the bracket.
  3. For programming and set up, refer to Control Module References .
   


© Copyright Chevrolet. All rights reserved