Preliminary Procedure

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Remove the left quarter inner trim finish panel. Refer to Quarter Inner Trim Finish Panel Replacement .

1

Front And Rear Object Alarm Module Nuts (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
5 N·m(44 lb in)

2

Front And Rear Object Alarm Module

Procedure

1. Disconnect the electrical connectors.
2. For programming and set up, refer to Control Module References .