Preliminary Procedure

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Remove the front floor console applique. Refer to Front Floor Console Applique Replacement

1

Radio Control Assembly Fastener(Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

2

Radio Control Assembly

Procedure

1. Use a flat-bladed plastic trim tool in order to release the retainer clips securing the radio control assembly to the instrument panel.
2. Disconnect the electrical connections.
3. When replacing the radio control assembly, transfer components as necessary.