Warning: Refer to Brake Dust Warning in the Preface section.

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tyre and wheel assembly. Refer to Tyre and Wheel Removal and Installation .
3. Remove the park brake shoes. Refer to Handbrake Shoe Replacement .
4. Remove the wheel speed sensor. Refer to Rear Wheel Speed Sensor Replacement .
5. Disconnect the park brake cable from the actuator and mounting bracket. Refer to Handbrake Cable Replacement .
6. Remove the wheel bearing/hub assembly. Refer to Rear Wheel Bearing and Hub Replacement .

1

Rear Brake Shield