To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Camshaft Cover Replacement - LE5 or LE9


2202794

Callous

Component Name

Preliminary Procedures

  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement : LE5 or LE9 .
  2. Remove the ignition coils. Refer to Ignition Coil Replacement : LE5, LE9, or LAF .
  3. Remove the camshaft position sensor intake. Refer to Camshaft Position Sensor Replacement - Intake : LE5 , LE9, or LAF .
  4. Remove the camshaft position sensor exhaust. Refer to Camshaft Position Sensor Replacement - Exhaust : LE5, LE9 or LAF .

1

Camshaft Cover Fastener (Qty: 11)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Camshaft Cover

Procedure

  1. Do not reuse camshaft gasket. Also use a new gasket when removing or replacing camshaft cover.
  2. Remove ignition coil wiring harness clips from the camshaft cover.
  3. Remove the fuel line bracket from the camshaft cover.
  4. Transfer components as necessary.
   


© Copyright Chevrolet. All rights reserved