Preliminary Procedure

1. Drain the cooling system. Refer to Cooling System Draining and Filling .
2. Remove the right engine mount bracket.Refer to Engine Mount Replacement - Right Side .
3. Remove the air cleaner. Refer to Air Cleaner Assembly Replacement .

1

Water Outlet Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10N·m (88 lb in)

2

Seal

3

Gasket

4

Water Outlet

Tip
Clean the mating surfaces, replace the seal and gasket