To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Mount Replacement - Right Side


2517212

Callout

Component Name

Preliminary Procedures

  1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  2. Install the engine support fixture. Refer to Engine Support Fixture .
  3. Prior to removing the mount, mark the mount location using spray paint or a marker for correct positioning during installation.
  4. If all powertrain mounts are replaced, perform "Powertrain Mount Balancing". Refer to the appropriate engine section.

1

Engine Mount Fastener (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
62 N·m (46 lb ft)

2

Engine Mount Fastener (Qty: 2)

Tighten
85 N·m (63 lb ft)

3

Engine Mount

Procedure

Transfer components as necessary.

   


© Copyright Chevrolet. All rights reserved