Exhaust Manifold Installation
Special Tools
EN-50435 Guide Pin
For equivalent regional tools, refer to Special Tools .
Note: Set EN-50435 guide pin 2 on the cylinder head before installation.
- Install the exhaust manifold (2) and new gasket (3).
Caution: Refer to Fastener Caution in the Preface section.
- Install the exhaust manifold mounting bolts (1) and tighten to 20 N·m (14.7 lb ft).
- Install the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Installation .
- Install the turbocharger. Refer to Turbocharger Installation .
- Install the DPF. Refer to Exhaust Particulate Filter Installation .
© Copyright Chevrolet. All rights reserved |