Cruze

Manual Transmission Shift Lever and Selector Lever Cable Replacement

1. Remove battery tray. Refer to Battery Tray Replacement .



2. Remove shift lever and selector lever cable (2) from transmission control housing (3).
3. Remove gear shift lever and selector lever cable from gear shift lever and selector lever cable bracket (1) by pushing back locking rings in counter driving direction.



4. Remove gear lever and selector lever cable (1) from bulkhead.
5. Remove shift lever and selector cable from control lever housing. Refer to Transmission Control Replacement .

1. Install shift lever and selector cable to control lever housing. Refer to Transmission Control Replacement .
2. Clip shift lever and selector lever cable (3) into transmission control lever housing (1).




Note: Install the guide with the white marking upwards to the bulkhead. Do not cross the cables.

3. Install gear lever and selector lever cable from inside the vehicle.
4. Install gear lever and selector lever cable (1) to bulkhead.
5. Check for correct fit.



6. Install gear lever and selector lever cable (2) to gear lever and selector lever cable bracket (1).
7. Install gear lever and selector lever cable to transmission control housing (3).
8. Install battery tray. Refer to Battery Tray Replacement .
9. Adjust shift lever and selector lever cable. Refer to Manual Gearbox Gear Lever and Selector Lever Cable Adjustment .