Volt
Turn Signal Switch Bracket Replacement
Callout
Component Name
Preliminary Procedures
Remove the steering wheel. Refer to
Steering Wheel Replacement
.
Remove the upper trim cover and the lower trim cover from the steering column. Refer to
Steering Column Lower Trim Cover Replacement
.
1
Turn Signal Switch Bracket
Procedure
Disconnect any electrical connectors as necessary.
Release the 2 tabs in order to release the direction indicator switch bracket from the steering column.
Transfer any parts as necessary. Refer to the following procedures:
•
Turn Signal Multifunction Switch Replacement
•
Windscreen Wiper and Washer Switch Replacement
•
Steering Wheel Airbag Coil Replacement
•
Steering Angle Sensor Replacement
©© Copyright Chevrolet. All rights reserved