To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Air Conditioning and Heater Module Assembly Removal and Installation


1869901

Callout

Component Name

Preliminary Procedures

  1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
  2. Remove the heater inlet hose from the heater core tube. Refer to Heater Inlet Hose Replacement : Diesel  → V6  → LE5 .
  3. Remove the heater outlet hose from the heater core tube. Refer to Heater Outlet Hose Replacement : Diesel  → V6  → LE5 .
  4. Remove the evaporator hose assembly from the thermal expansion valve. Refer to Air Conditioning Evaporator Thermal Expansion Valve Replacement .
  5. Remove the instrument panel tie Bar. Refer to Instrument Panel Tie Bar Replacement .

1

HVAC Module Nut (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
8 N·m (71 lb in)

2

HVAC Module Bolt (Qty: 2)

Tighten
8 N·m (71 lb in)

3

HVAC Module Assembly

Procedure

  1. Note the location and routing of the electrical harness to ensure correct re-installation.
  2. Disconnect the electrical connections.
  3. When replacing the HVAC module assembly, transfer all necessary components.
   


© Copyright Chevrolet. All rights reserved