To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Oil Filter Adapter Replacement


2222802

Callout

Component Name

Preliminary Procedures

  1. Remove the generator. Refer to Generator Replacement : LNQ  → LF1  → LE5 .
  2. Remove the oil filter. Refer to Engine Oil and Oil Filter Replacement .

1

Oil Filter Adapter Fastener (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
25 N·m (18 lb ft)

2

Oil Filter Adapter

Procedure

  1. Replace oil filter adapter gasket.
  2. Disconnect electrical connector as needed.
  3. Transfer components as necessary.
   


© Copyright Chevrolet. All rights reserved