Preliminary Procedures

1. Raise and properly support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the engine shield. Refer to Engine Shield Replacement .
3. Remove the front fascia. Refer to Front Bumper Fascia Replacement : Long Body  → Short Body .
4. Disconnect the charge air cooler inlet duct from the charge air cooler. Refer to Charge Air Cooler Inlet Duct Replacement .
5. Disconnect the charge air cooler outlet front duct from the charge air cooler. Refer to Charge Air Cooler Outlet Front Duct Replacement .

1

Charge Air Cooler Fastener (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Charge Air Cooler

Procedure

1. Unbolt the condenser from the vehicle to aid in removing the charge air cooler.
2. Slide the charge air cooler downward and out from behind the condenser.