Preliminary Procedures

1. Open the bonnet.
2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection : LDV,LSF  → LCU,LDE .
3. If equipped with a front suspension skid plate, remove the drivetrain and suspension frame skid plate. Refer to Drivetrain and Front Suspension Frame Skid Plate Replacement .
4. Remove the water pump,air conditioning compressor and generator belt. Refer to Water Pump, Air Conditioning Compressor, and Generator Belt Replacement .
5. Remove the exhaust front pipe. Refer to Exhaust Front Pipe Replacement : LDV,LSF  → LDD  → LDE .
6. Disconnect the alternator wiring harness plug.

1

Alternator Positive Cable Nut

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Remove the positive cable.

Tighten
20 N·m (15 lb ft)

2

Alternator Bolt (Qty: 3)

Tighten
22 N·m (16 lb ft)

3

Generator